From 4e6d3409668c320ec8ef1f2b6642a61779483133 Mon Sep 17 00:00:00 2001 From: Christopher Ruwisch <christopher.ruwisch@gmail.com> Date: Thu, 13 Feb 2025 17:12:16 +0100 Subject: [PATCH] added information regarding to workshop --- .../sizing/empennage_design/design-methods.md | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/docs/documentation/sizing/empennage_design/design-methods.md b/docs/documentation/sizing/empennage_design/design-methods.md index c86854e..dbef141 100644 --- a/docs/documentation/sizing/empennage_design/design-methods.md +++ b/docs/documentation/sizing/empennage_design/design-methods.md @@ -3,7 +3,12 @@ On this page you get information about the methods used to design an empennage ## Volume coefficient method -The volume coefficient method which is used to generate the empennage. It is a classic method by selecting an appropriate Volumecoefficient where it creates a relation between the reference area and the empennage area. + +??? danger "Important" + This method does not take any stability requirements into account! + + +The volume coefficient method which is used to generate the empennage. It is a classic method by selecting an appropriate volume coefficient where it creates a relation between the reference area and the empennage area. E.g. the volume coefficient for a conventional tail (vertical stabilizer ($vs$) and horizontal stabilizer ($hs$)) is given for the vertical stabilizer by: $$ -- GitLab