Commit a1e8b00a authored by Lukas Aspöck's avatar Lukas Aspöck

minor update for impedance tube measurement report

parent 398ada13
......@@ -116,9 +116,8 @@
\begin{tabular}{|p{0.43\textwidth}p{0.51\textwidth}|}\hline
\multicolumn{2}{|p{0.99\textwidth}|}{
\underline{Description of the test facility:} \newline
Impedance tube made of aluminum with a 2 inch bore diameter. Specimen holder with an adjustable tubing end of a massive, sealed aluminum piston. Measurement tube with three microphone bores with a distance of 17mm and 110mm.
Probe microphone picking up the sound field at the center of the tube.
Evaluable frequency range: approx. 100 Hz - 8 kHz by suppressing the first tube mode. Broadband excitation by sine sweeps. Evaluation according to ISO10534-2 with the help of a FFT measurement technique developed at ITA.}\\
Impedance tube made of aluminum with a 2 inch bore diameter. Specimen holder with an adjustable tubing end of a massive, sealed aluminum piston. Measurement tube with four microphone bores, the distance from the first microphone position to the second, third and fourth are 17~mm, 110~mm and 510~mm, respectively. Probe microphone picking up the sound field at the center of the tube.
Evaluable frequency range: approx. 100 Hz - 8 kHz by suppressing the first tube modes. Broadband excitation by sine sweeps. Evaluation according to ISO10534-2 with the help of a FFT measurement technique developed at ITA.}\\
&\\
Test date: & \datumDerMessung \\
Test Engineer: & \nameDesPruefers\\
......
......@@ -270,7 +270,11 @@ else % mgu mode
humidity = inStruct.luftfeuchtigkeit;
end
probeFileName = [strrep(strrep(nameDerProbe, ' ','_'), '.', ''), '_mean(' num2str(nMeasurements) ')' ];
if (~exist('Auswertung','dir'))
mkdir('Auswertung');
end
probeFileName = [ 'Auswertung/' strrep(strrep(nameDerProbe, ' ','_'), '.', ''), '_mean(' num2str(nMeasurements) ')' ];
texFileName = [probeFileName '.tex'];
grafikName = [probeFileName '_grafik.png'];
......@@ -366,7 +370,7 @@ if boolPlotImpedance == 1
lgh = legend({nameDerProbe},'Interpreter','none', 'location', 'northwest');
set(gca, 'TickDir', 'out', 'box', 'off')
probeFileName = [strrep(nameDerProbe, ' ','_'), '_' nameCell{i} '_mean(' num2str(nMeasurements) ')' ];
probeFileName = [ 'Auswertung/' strrep(nameDerProbe, ' ','_'), '_' nameCell{i} '_mean(' num2str(nMeasurements) ')' ];
if i ==2
ylim([-1 1]* 5000)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment