Aufgrund einer Wartung wird GitLab am 17.08. zwischen 8:30 und 9:00 Uhr kurzzeitig nicht zur Verfügung stehen. / Due to maintenance, GitLab will be temporarily unavailable on 17.08. between 8:30 and 9:00 am.

Commit 32f81d3d authored by Bichen Li's avatar Bichen Li

- Update the assertion function

parent cb8c438b
......@@ -5,7 +5,19 @@ import os
from readtools import *
The validationtools are used to validate the simulate results from the model.
A typical process of validate a model contains four parts
- Building & Running the module to get results
- Reading in the results
- Mapping the results with the reference results
- Asserting the module
The first step is done by Py4Mod package, the second by readtool.
The validationtool focuses on the last two steps. the conversion function converts the reference results
timeseries into the modelica timeseries (changing the names and units), the compare function compares two
timeseries, and the assert function gives an assertion of the compare result. At last, a top level validation
function is introduced to organize the whole job.
def convert_neplan_to_modelica_timeseries(neplan_timeseries):
......@@ -112,7 +124,7 @@ def compare_timeseries(ts1, ts2):
return dict(zip(timeseries_names, timeseries_error))
def assert_modelia_results(net_name, error):
def assert_modelia_results(net_name, error, threshold):
assert the result data of a net.
:param net_name: name of the network
......@@ -123,7 +135,7 @@ def assert_modelia_results(net_name, error):
fail_list = [] # List for all the failed test
# the limitations are set to 0.5
for name in error.keys():
if abs(error[name]) > 0.5:
if abs(error[name]) > threshold:
print("Test on %s Passed" % name)
......@@ -137,7 +149,7 @@ def assert_modelia_results(net_name, error):
raise ValueError('Test on %s is not passed!' % net_name)
def validate_modelica_res(net_name, modelica_res_path, reference_res_path):
def validate_modelica_res(net_name, modelica_res_path, reference_res_path, threshold=0.5):
Top level function for the validation of modelica, calls all the function needed to execute the validation.
:param modelica_res_path: the path of the modelica result file, whose suffix should be .mat
......@@ -151,4 +163,4 @@ def validate_modelica_res(net_name, modelica_res_path, reference_res_path):
res_ref = convert_neplan_to_modelica_timeseries(read_timeseries_NEPLAN_loadflow(reference_res_path))
res_err = compare_timeseries(res_ref, res_mod)
assert_modelia_results(net_name, res_err)
assert_modelia_results(net_name, res_err, threshold)
......@@ -5,29 +5,11 @@ import sys
from ModelicaModel import ModelicaModel
from validationtools import *
from readtools import *
def simulate_modelica(model_name, model_path):
interface = ModelicaModel(model_name, model_path)
#from ModelicaModel import ModelicaModel
# Initialization
interface.loadFile(model_path + '\ModPowerSystems\')
# Redirection
cwd = os.getcwd()
wd = os.path.join(cwd, 'test')
if not os.path.exists(wd):
interface.changeWorkingDirectory(wd.replace("\\", "/"))
# Build & Run
print("Test Start")
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment